Primer Betonkontakt Boro
Betonkontakt BC 135 is a ready-to-use product. It has high adhesion to cement, mineral and gypsum substrates, making it an ideal bonding layer between old and new substrates. It must be used on weak, dense and non-absorbent surfaces. Used for: gluing new faience, terracotta, etc. over old ones. For sticking plasterboard on brick, concrete bases, etc., when applying plasters, plasters on walls and ceilings. Grund Boro is used for priming cement, lime-cement, gypsum plasters and plasters, concrete surfaces, aerated concrete, bricks; before applying latex, facade paints, gluing tiles with cement adhesives, gluing wallpaper and cork linings, laying parquet, etc. For priming concrete surfaces before applying self-leveling floor screeds. It is diluted with water in a ratio of 1:5. BORO primer has a good base strengthening. It also provides good adhesion to the next coating. Borokontakt contact primer is used as a bonding layer between old and new plaster (gypsum, lime-cement, etc.), old and new concrete, panels, ordinary and self-leveling screeds, gluing of new faience and terracotta on old ones, as well as on terracotta and marble on mosaic. Borokontakt primer increases the strength between the old and the new layer. Waterproof and effective on dense, poorly or non-absorbent surfaces. A universal deep-penetrating and strengthening primer for interior and exterior use. High-quality bonding product for preparing the base before laying latex, facade paints, plasters, cement adhesives, gluing wallpaper, laying parquet, etc. The primer penetrates deep into the base, strengthening it, increasing adhesion to the next coating, reducing paint consumption. Can be applied by brush, roller or spraying in one layer.