Gypsum Putty, Gypsum Glue,
Gypsum Putty BORO is intended for interior walls and dry rooms on surfaces made of concrete, aerated concrete, lime-sand, lime-cement-sand, cement-sand and gypsum plasters, gypsum masonry and gypsum fiber boards in rooms with normal air humidity. It has exceptional plasticity and a long open time. Forms a smooth and strong surface. Gypsum Adhesive for plastering plaster panels, plaster blocks, gluing plaster ornaments and profiles, plastering walls and ceilings in dry rooms, etc. It has exceptional plasticity and forms a strong surface. Fine creamy putty, for ideal smoothness of the putty surface and to fill fine cracks and scratches on your walls and ceilings. It is laid on gypsum and cement plasters, gypsum fiber, plasterboard. The end result is a perfectly smooth base, ready for priming and painting. STUKOPLAST Angro is a fine putty mixture suitable for smoothing, plastering fine cracks and irregularities on walls and ceilings. White cement putty BORO for external walls and wet rooms. May not be painted. For plastering external walls and smoothly cast concrete surfaces, plastering chimneys, ceilings, wet rooms. It has a high adhesion strength to the base. Universal joint filler Knauf Super Finish 25 kg (sheet rock) for manual or machine filling of plasterboard joints and for complete putty. All Purpose / Knauf Super Finish is a ready-to-use mixture with a thick creamy consistency. Sheetrock is for filling plasterboard joints in combination with paper reinforcing tape and for complete putty. Complete sheetrock putty will level, smooth even small irregularities or surface defects that usually become visible only after painting. This is most easily noticed on walls with strong lateral lighting and paints with a glossy surface.